Your monthly AI allowance is the amount of AI usage included in your Pinpoint subscription every month, shared across most AI features in the platform.
There's no separate license or charge each time you use an AI feature. If your team needs more, a billing manager can raise your limit with an AI top up pack.
🔒 Availability
Until your company's limit is active, you can see your AI usage on the Tokens tab, but AI features won't pause when you reach 100%. Your Customer Success Manager (CSM) can tell you when your limit goes live.
Overview
Your allowance works like this:
It's one shared limit across all the AI features included in your plan.
Its size is based on your annual Pinpoint subscription.
It resets at midnight UTC on the 1st of every month.
It's shown as a percentage of your allowance on the Tokens tab, never as a cost.
Nothing is charged automatically if you reach it!
Features
Features included in the allowance use AI tokens, while features outside of the allowance continue to use Pinpoint credits.
In the allowance
These features share your monthly AI allowance:
Feature | What uses your allowance |
Pin | |
AI Custom Fields | Each generation, including AI Criteria Checklist and AI Candidate Filters. |
AI Notetaker |
Your Tokens tab lists every feature that uses your allowance, so you can see exactly where it's going.
Outside of the allowance
These features are billed separately or don't count at all:
Feature | What is uses instead |
Nothing. It's included in your plan and doesn't count toward your allowance. | |
AI Sourcing | Pinpoint credits. |
Pinpoint credits. |
Allowance amounts
Your allowance is set by the annual price of your Pinpoint subscription.
The figures below are monthly estimates to help you plan your AI usage. Actual usage depends on how you use each feature.
Pin usage in particular varies a lot with the length of the conversation and what you're working on. We review allowances regularly, and they may change.
Annual subscription | Pin conversations | AI Custom Field generations | AI Notetaker hours |
50,000 or more | About 6,500 | About 95,000 | About 95 |
22,000 to 49,999 | About 2,500 | About 35,000 | About 40 |
10,000 to 21,999 | About 1,000 | About 15,000 | About 15 |
Below 10,000 | About 500 | About 7,000 | About 10 |
Because the limit is shared, these figures are either/or. For example, a company using half its allowance on Pin has half left for AI Custom Fields and AI Notetaker.
✅ Tip
If your subscription is 100,000 or more a year, your allowance goes up by about 5,000 Pin conversations (or the equivalent) for each additional 50,000.
Allowance limits
When your company uses all of its monthly AI allowance, AI features pause until the allowance resets or a billing manager starts an AI top up pack.
Usage alerts
Billing managers and your CSM get an email and an in-app notification as usage grows.
When these trigger varies depending on your setup.
Setup | Alerts sent at |
No top up pack | 80% and 100% of your monthly allowance |
With a top up pack | 90% and 100% of your total limit, including the pack |
ℹ️ Note
There is no alert if you pass your standard allowance with a top up pack purchased. Your pack still has usage left at that point, so nothing pauses.
Large AI runs
If a large run, such as adding an AI field across many candidates, would take you close to or past your limit, Pinpoint shows how much of your limit it’ll use and asks you to confirm before it starts.
Reaching the limit
When you reach your limit, new AI requests stop.
Requests already running can finish - and anything AI has already produced, such as transcripts, summaries and AI field values - stays in place.
Feature | At your limit |
Pin | Tells you it can’t start new requests. |
Routines | Scheduled runs are skipped, with the reason shown. |
Job Evaluations | New evaluations don’t start. |
AI Custom Fields | New generations don’t run. |
Careers Site chatbot | Stops replying to candidates. |
AI Notetaker | Doesn’t record new interviews and is hidden on interviews. You can’t reassign speakers on existing transcripts. |
✅ Tip
You can set a limit for each feature in the Tokens tab, so one busy feature can't use your whole allowance.



